|
|
|
|
|
Product Name: Split Square Veneer Panel
Product Notes: Recessed panel made from 1/4inch thick, matching veneer plywood.
(Paint-grade products will have 1/4" MDF panel without veneer for improved paintability.)
Product Grouping: Cope & Stick
Minimum Width*: 4
Minimum Height*: 2
Restrictions: Doors or Drawer Fronts over 48" tall with vertical grain panel will have a center rail. Doors or Drawer Fronts over 26" wide with vertical grain panel will have a center stile. (If horizontal panel grain is selected, then these maximums are reversed.) | | *Minimums will change if Frame Width is modified in the options. | |
Product Name: Split Square Veneer Panel
Review and modify each option, as needed.
| Category | Selected Option | Option Drawing | View/Modify | | Specie: | Paint Grade Maple Hybrid (w/ 1/4" MDF panel for improved paintability) | | [Modify] | | Finish Color: | Unfinished | | [Modify] | | Frame Width: | 2-1/4in | | [Modify] | | Outside Edge Profile: | E-0 |  | [Modify] | | Inside Edge Profile: | CS-B |  | [Modify] | | Panel Profile: | veneered_panel_std |  | [View] | | Panel Grain Direction: | Vertical Grain | | [Modify] | | Concealed Hinge Boring: | None | | [Modify] |
| |
Product Name: Split Square Veneer Panel
|
Cost calculation (based on the selected options):
0
per item
plus
0
per square foot*
0
or more per linear inch*
plus
0
0
per unit
|
|
